Telos NX12 User Manual Page 102

  • Download
  • Add to my manuals
  • Print
  • Page
    / 133
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 101
92 | Section 7
Audio
Analog Inputs
2x send analog inputs
2x Program-on-Hold analog inputs
XLR female, pin 2 high. Active balanced, with RF protection.
Output level adjustable from –7 to +8 dBu (nominal)
Analog clip point
+21dBu
Output impedance
<60 Ohms x2
Analog-to-digital converter resolution
20 bits
Analog Outputs
2x receive analog outputs
XLR male, pin 3 high.
Input level Adjustable, -7 to +8 dBu (nominal) level.
Impedance
Bridging, >100K Ohms
Digital-to-analog converter resolution
24 bits
Headroom before clipping
20 dB from +4dBu nominal level
AES3 Digital Inputs/Outputs (option)
e AES input/output option module substitutes 2x input and 2x output AES XLRs in place of
the standard analog, providing 4x in/4x out channels.
Conform to AES3 standard
Sample rates 32, 44.1, and 48kHz.
Rate conversion
Input and output, independently selectable
Clock
AES input or ISDN network clock.
Input Level
Adjustable -27 to –12 dBfs
Output Leve
l Adjustable –27 to –12dBfs
Livewire
Livewire connection is standard for all hybrids in/out and POH audio in
Audio Performance
Frequency Response ± .5dB, 50 to 20kHz (swept sine procedure, measured from analog input
to output with unit in loopback mode)
THD+N/Input <0.06% typical (Measured at 0 dBu @ 1 kHz analog in to AES out in loop-
back mode)
Switching Matrix and Conferencing
All-digital audio routing and switching
Page view 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 132 133

Comments to this Manuals

No comments