Telos NX12 User Manual Page 57
- Page / 133
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
DETAILED CONFIGURATION & REFERENCE | 47
e Nx12’s default IP number is 192.168.0.230. Normally, you would change this to a number
appropriate for your network using TCP/IP Setup in the System menu. You would also enter
appropriate values for Subnet Mask and Gateway Address. See e System Menu below for
details. But if you will just be doing configuration with a cross-cable or isolated switch/hub, you
can keep the default IP number. You can also connect first with the default, then change the IP
values using the Web, then reconnect with the new address.
After you have a network connection between your PC and the Nx12, open a Web browser and
enter http://192.168.0.230 (substitute your actual IP number if you have changed from the
default) into the address entry field. You will then see the Nx12’s main Web screen:
Upon clicking any of the menu links, you will be prompted to enter a user name and password.
e default user name is user and the password is <blank>.
e Status, System, Telco, and Audio menus provide access to the full set of configuration op-
tions, a superset of those available on the front panel. e ISDN SPID and DN entries are only
available on the Web. interface (It’s not very convenient to enter numeric data on the LCD/
button interface, so we thought you’d appreciate having a PC’s keyboard for that.)
e Livewire menus are only available on the Web interface.
5.4 The Audio Menu
is group consists of settings that control the audio levels, processing options, mixing, etc.
Nominal Input Level
Adjusts to the level expected from the mixing console. is adjustment affects all of the input
options: analog, AES, and Livewire. It is applied before the send AGC.
Be careful to avoid clipping of the Nx12 inputs. Clipped send audio will create a problem for
the system, and you will probably experience poor hybrid performance. Increasing the input
level past the correct value will not make the send louder due to the AGC/limiter.
- TELOS Nx12 1
- We support you 2
- Notices and Cautions 3
- CAUTION: 3
- WARNING: 3
- Table of Contents 5
- Introduction 11
- 2 12
- INTRODUCTION 13
- Installation 15
- 2.4 ISDN Technology 101 16
- Data and Voice 17
- Hunt Groups 17
- Ordering Help 18
- INSTALLATION 19
- 2.6 Integration with a PBX 20
- 2.7 Studio Audio Connections 21
- 12 22
- Using a small mixer 23
- Phones and Remotes 23
- Input (To Caller ) 24
- INSTALLATION 25
- Output (Caller) 26
- 2.8 Desktop Director Ports 27
- 18 28
- Connecting Desktop Directors 29
- 20 30
- 2.9 Ethernet 31
- 22 32
- INSTALLATION 33
- 2.11 AC (mains) Power 34
- Basic Conguration 35
- Analog Phone Line Setup 36
- ISDN Setup 36
- BASIC CONFIGURATION 37
- Is the ISDN working? 38
- 3.3 Audio Input and Output 39
- Time to test it out! 40
- What now? 41
- User Operation 43
- 34 44
- Call is on the handset 44
- Call is on the speakerphone 44
- Line Button Columns 45
- Hold & Drop 45
- Block All 46
- Dialing Keypad 46
- Function Buttons 46
- USER OPERATION 47
- 38 48
- USER OPERATION 49
- [Producer] if 49
- 40 50
- [Talent] if you 50
- USER OPERATION 51
- 4.2 The Call Controller 52
- 4.3 The Console Director 52
- 5.1 Level Metering 53
- 5.2 Status Displays 54
- Desktop Director Status 55
- The LCD/Button User Interface 56
- The Web User Interface 56
- 5.4 The Audio Menu 57
- Nominal Output Level 58
- Meter Mode 58
- Phone Send Adjustment 58
- Call Ducking 59
- Receive AGC 59
- Noise Gate 59
- Feedback Reduction 60
- Mix Minus Mode 60
- 52 62
- AES Mode 63
- 5.5 The Telco Menu 64
- ISDN Protocol 65
- 56 66
- SPIDs and MSN/DNs (Web Only) 67
- 58 68
- 5.6 The System Menu 69
- Contrast (LCD Only) 70
- Show Mode (LCD Only) 70
- Hold on Select 71
- Audio Loop (LCD Only) 71
- Factory Defaults (LCD Only) 71
- Reboot (LCD Only) 71
- 5.7 Show Modes 72
- 64 74
- 5.8 Livewire 75
- 66 76
- Quality of Service 77
- Axia Consoles 77
- 5.9 Firmware Update 78
- Logged in with user rights 79
- >>? CPC <return> 80
- Send Audio Processing 81
- 72 82
- 74 84
- 6.1 Overview 85
- 6.3 General Troubleshooting 85
- 76 86
- 78 88
- 80 90
- CLASS 1.1 (normal) 92
- 84 94
- 86 96
- 88 98
- 90 100
- Specications 101
- Audio Performance 102
- Desktop Director Ports 103
- Control Ports 103
- Two-Studio Modes 103
- Four-Column/Four-Hybrid Mode 104
- “Euro” Operation Mode 104
- SPECIFICATIONS 105
- 107
- USA SPIDs by Telco 109
- 100 110
- USA SPIDS BY TELCO 111
- Telephone Terminology Guide 113
- 104 114
- 106 116
- 108 118
- 110 120
- 112 122
- 114 124
- USA ISDN Ordering Guide 125
- 116 126
- (ISDN Order Code Capability) 127
- ISDN BRI LINE ORDER 128
- □ No hunt groups 129
- 120 130
- Euro-ISDN Ordering Guide 131
- 122 132
© 2020, manymanuals.com. All rights reserved. | 1.015 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals